Plast White. Engineered whiteness. Precision-filled performance.
A finely engineered CaCO₃ filler masterbatch built on virgin polyethylene carrier resin — formulated for uniform dispersion, superior whiteness, and measurable cost-in-use advantage across polyolefin processing.
A calcium-carbonate filler system, engineered for whiteness.
PLAST WHITE is a precision-formulated filler masterbatch — a blend of ultra-fine particle size, surface-coated CaCO₃ (calcium carbonate) powder combined with virgin polyethylene resin and a proprietary additive package. Every ratio is customised against the target end-application, not sold off a generic shelf spec.
Feedstock is sourced from globally consistent, quality-audited suppliers, so every batch — irrespective of production run or season — holds the same particle-size distribution, whiteness index and processing behaviour.
For Better Performance
Zero moisture. Zero contamination. Total consistency.
Every PLAST WHITE grade is produced on state-of-the-art extrusion lines under a full-fledged R&D and Quality Assurance framework — engineered to deliver moisture-free, contamination-free output with uniform particle-size distribution, excellent dispersion, strong resin bonding and a low coefficient of friction.
Versatility
One grade. Every polyolefin.
PLAST WHITE is engineered to be compatible across LDPE, LLDPE and HDPE resin systems — raising volumetric output and economising final product cost, without compromising the quality parameters critical to the end application.
Built into every pellet.
PLAST WHITE is formulated around four engineering pillars — particle architecture, resin compatibility, thermal behaviour, and surface performance.
Ultra-Fine CaCO₃ Dispersion
Coated calcium carbonate at ultra-fine particle size ensures homogeneous dispersion through the polymer matrix with minimal agglomeration.
Virgin PE Carrier Resin
A 100% virgin polyethylene carrier delivers a clean, contamination-free base for consistent melt flow and colour development.
Low Coefficient of Friction
Optimised surface treatment reduces inter-layer friction — smoother processing on blown-film and extrusion lines.
Enhanced Whiteness Index
Precision-controlled particle geometry improves opacity and brightness without dulling the finished surface.
Customised Loading Ratios
Filler-to-carrier ratio is tuned per application — balancing mechanical performance against cost-in-use targets.
Food-Contact Compliant
Non-toxic, eco-friendly formulation built to meet food-grade regulatory compliance where required.
Insulated from petroleum price volatility — by design.
Almost all plastics trace back to petroleum feedstock, and resin prices climb whenever oil and gas supply tightens. BAJAJ FILLERS are mineral-based, available consistently through the year, with pricing that moves at a far slower pace — making filled formulations more commercially attractive, run after run. The base resin is available to everyone; what BAJAJ FILLER unlocks is a formulation edge that outperforms in a fiercely competitive supplier landscape.
Three decades of masterbatch engineering.
Bajaj began operations in Nagpur, Maharashtra, three decades ago and has grown into a filler and colour masterbatch manufacturer trusted across polyolefin processing industries. The company is ISO 9001:2015 certified by TÜV Nord, with quality control built into every stage — from imported feedstock to final QA release.
A dedicated R&D and Quality Assurance department governs every PLAST WHITE batch, ensuring particle-size consistency, moisture control, and dispersion quality hold steady across production cycles — not just on a data sheet.
Every reason to make it a quality product.
PLAST WHITE isn't just a cost-reduction filler — it's a formulation lever that measurably improves five core production outcomes.
Improves Strength
Raises tensile strength, elongation and bonding strength across the finished film or moulded part.
Better Printability
Enhanced surface finish and whiteness improve ink lay-down and print clarity downstream.
Improves Stiffness
Optimised CaCO₃ loading adds structural rigidity without sacrificing toughness.
Enhances Processability
Low coefficient of friction and clean dispersion translate into smoother, more stable line runs.
Increases Output
Higher volumetric throughput per kilogram of virgin resin, improving overall line economics.
From raw CaCO₃ to finished pellet.
A controlled, multi-stage process converts imported mineral feedstock into a dispersion-ready masterbatch.
Feedstock Sourcing
Ultra-fine CaCO₃ powder is imported from globally consistent, quality-audited sources to guarantee particle-size uniformity batch after batch.
Surface Coating
The CaCO₃ particles are surface-coated to improve bonding affinity with the polyethylene carrier and reduce inter-particle agglomeration.
Compounding With Virgin PE
Coated CaCO₃ is compounded with virgin polyethylene resin and a performance-additive package on precision extrusion equipment.
R&D-Governed QA
Every run passes through the R&D and Quality Assurance department, checking moisture content, dispersion quality and whiteness index.
Pelletising & Dispatch
The compound is pelletised into a moisture-free, contamination-free masterbatch, ready for direct dosing into converter lines.
Wherever polyolefins are processed.
PLAST WHITE's polyolefin compatibility makes it a drop-in filler across a wide span of converting processes.
Blown Film
Higher opacity and reduced friction on high-speed film lines.
Injection Moulding
Improved stiffness and dimensional stability in moulded parts.
Blow Moulding
Consistent wall whiteness and surface finish on Plastic containers.
Raffia / Woven Sack
Reinforced tape strength for woven and FIBC bag production.
Stability, built into the formulation.
Five performance guarantees engineered into every PLAST WHITE batch.
Heat Stability
Light Fastness
UV Stability
Environmental Stability
Food Contact Application
Plast White. Engineered for output.
A filler masterbatch built on three decades of formulation discipline — from imported CaCO₃ feedstock to R&D-governed pelletising.
Back To Top
BAJAJ PLAST PVT LTD