Bajaj Plast OB • PP / PE carrier resin only
Optical Brightener
Masterbatch.
A brighter appearance. A cleaner white.
Bring a fresh visual finish to your PP and PE products.

Small addition. Visible change.
Let your products
look their brightest.
Bajaj Optical Brightener Masterbatch helps offset yellow undertones in suitable white and natural PP/PE formulations, improving perceived whiteness and visual appeal.
Key features & application benefits
Better appearance.
Across everyday applications.
Brighter-looking whites
Enhances perceived whiteness in white furniture, woven sacks and moulded articles for a cleaner visual finish.
Less visible yellowness
Helps mask yellow undertones in compatible virgin and recycled PP/PE, improving the overall colour balance.
More appealing products
Supports a fresh appearance in packaging, household articles and light-coloured consumer products.
Uniform visual effect
A dispersed masterbatch format supports even distribution when the grade, dosage and mixing are correctly selected.
Convenient pellet dosing
Blend a compatible PP- or PE-based grade with the production resin using controlled masterbatch dosing.
Support for recycled formulations
Helps improve the appearance of suitable recycled polyolefins. Results depend on feedstock colour, contamination and formulation.
Optical results vary with dosage, resin, pigments, article thickness and lighting. Confirm the finish in an application trial.
Applications
Everyday products.
Extraordinary visual appeal.
Optical brightness for suitable white, natural and light-coloured PP/PE products.

Plastic furniture
Enhances perceived whiteness in white and light-coloured PP/PE chairs, tables and stools.

Household containers
Helps reduce yellow undertones in suitable PP/PE tubs, storage containers and household articles.

Jerry cans
Supports a cleaner visual appearance in natural and light-coloured HDPE jerry cans.

Packaging films
Improves perceived brightness in suitable white or natural PE/PP packaging film formulations.

Carry bags
Helps white and light-coloured PE carry bags achieve a fresher-looking finish.

Crates
Supports visual brightness in suitable light-coloured PP/HDPE storage and transport crates.

Waste bins
Helps improve the appearance of white and light-coloured PP/PE waste bins.

Toys
Adds visual brightness to suitable PP/PE moulded toys. Confirm the selected grade’s end-use compliance.

Recycled plastic
Helps offset a yellow cast in selected recycled PP/PE formulations after feedstock and shade trials.

Traffic barricades
Can enhance brightness in suitable light-coloured PE barricade formulations. UV durability requires a separate stabilisation system.

Woven sacks
Enhances perceived whiteness in suitable PP raffia tapes and white woven sacks.

Tarpaulins
Supports brightness in suitable white and light-coloured PE/PP woven or coated tarpaulins.

FIBC bags
Helps achieve a cleaner white appearance in suitable PP bulk-bag fabric formulations.

Water tanks
Enhances perceived whiteness in suitable white PE water tanks. Confirm the grade for the moulding conditions and intended end use.

Pail containers
Helps white PP/HDPE pails and lids achieve a cleaner visual finish with reduced yellow undertones.

HDPE bottles
Supports a bright, fresh appearance in suitable white and natural HDPE bottle formulations.

PP luggage
Can improve perceived brightness in suitable white and light-coloured PP luggage shells. Evaluate the effect with the selected pigment system.

Construction helmets
Supports visual whiteness in suitable PP/HDPE helmet shells. Validate the complete formulation against required protective performance standards.
Select the grade for the polymer, pigment system and end use. Optical brightener improves perceived brightness; it does not add strength, opacity or weathering protection.
Understanding optical brightening
Less yellow in appearance.
More white to the eye.
See how optical brightener changes the way suitable PP and PE products appear under light.

How does yellow-looking plastic appear whiter?
Optical brightener absorbs ultraviolet light and emits visible blue light. This blue fluorescence helps balance a yellow undertone, so suitable white or natural plastic looks brighter and less yellow.
The masterbatch is blended into the polymer during manufacturing. It is not a surface cleaner or a treatment that reverses ageing in an existing plastic product.
Does it prevent yellowness?
It helps mask the visual yellow cast. It does not stop the underlying thermal or UV degradation that can cause yellowing. Where needed, use an appropriate antioxidant or UV-stabilisation system alongside the brightener.
With & without optical brightener
A cleaner white.
A visible difference.
An illustration of the appearance target for suitable white PE water-tank formulations.

Left • With optical brightener — illustrative
A brighter-looking finish.
Blue fluorescence can help offset yellow undertones and enhance perceived whiteness when the grade and dosage are correctly selected.
Right • Without optical brightener — illustrative
A more visible yellow cast.
Yellow undertones from the resin or formulation may be more noticeable without optical correction. Not every untreated plastic appears yellow.
How it works
Invisible light.
A visible difference.
Optical brightening agents absorb ultraviolet light and re-emit visible blue light. This fluorescence helps balance a yellow cast, making suitable plastics appear whiter and brighter.
The effect depends on the light source. Optical brightener does not replace UV stabilisation or the opacity provided by TiO₂.


How it’s made
Optical brightening.
In a PP or PE carrier.
Bajaj Optical Brightener Masterbatch is supplied only in polypropylene (PP) or polyethylene (PE) carrier resin bases.
Optical brightening agents are dispersed into the selected carrier by melt compounding, then formed into pellets for convenient blending with the base polymer.
Choose the carrier grade according to your production resin and processing requirements.
How it’s used
Select. Blend. Validate.
A straightforward addition to your formulation, with the dosage matched to the finished product.
Select the right grade
Share your PP/PE resin, virgin or recycled content, processing temperature and target shade with Bajaj.
Dose and blend
Use the grade-specific recommended addition level. Mix uniformly with the base resin or use calibrated dosing equipment.
Confirm the finish
Run a production trial. Check whiteness, shade and dispersion under the intended lighting, then approve final properties.
Use the selected grade’s technical data sheet for dosage and processing guidance. Increasing dosage does not always increase brightness.
The optical effect
Fluorescence starts with light.
The result depends on your formulation.
The supplied visual illustrates a material’s response under UV illumination. Its fluorescent colour is not the finished colour of the plastic article.
Assess your finished product under daylight and the lighting used by your customer, alongside a sample without optical brightener.

Plastic processing • Bajaj RESY product
Recycled plastic.
A brighter next chapter.
Bajaj Optical Brightener Masterbatch is part of our RESY offering for suitable recycled PP and PE applications.
Add the selected PP- or PE-carrier grade during melt processing to help counter yellow undertones and improve the perceived brightness of the finished article.
Match the dosage to the recyclate’s starting colour, the pigment system and your target finish. Confirm the result under the intended lighting.

PP / PE carriers only
We support recycling.
Assess the recyclate.
Sort, clean and prepare the recycled PP/PE. Check its colour, contamination and moisture before selecting the formulation.
Add Bajaj Plast OB.
Dose the compatible PP- or PE-based optical brightener grade and distribute it evenly during compounding or conversion.
Validate the product.
Evaluate the finish in the intended moulding, film or tape application. Approve colour and required mechanical properties.
Optical brightener helps improve appearance. It does not remove contamination, repair polymer degradation or make a product automatically recyclable.
From plastic furniture
to everyday packaging.
Make brightness part of your product.
Why choose Bajaj?
Your product.
Your shade.
Our focus.
Choose Bajaj Optical Brightener Masterbatch with your finished application in mind—from the carrier resin to the final visual result.
PP / PE focused selection
Choose from PP- and PE-carrier options suited to your polyolefin formulation.
Application-led guidance
Discuss the resin, colour target and end use to identify a suitable grade and trial approach.
Formulation support
Evaluate the optical brightener alongside white, colour and other additive masterbatches in the complete formulation.
A complete masterbatch range
Coordinate appearance and functional requirements with Bajaj’s colour, white, filler and additive portfolio.
Questions & answers
A little more clarity.
Which carrier resins are available?
Bajaj Optical Brightener Masterbatch is available only in PP and PE carrier resin bases. Select the grade that matches your base polymer and application.
Can it be used in plastic furniture?
Yes, suitable grades can enhance the visual brightness of white or light-coloured PP/PE furniture. Validate the shade and performance in your furniture formulation.
What dosage should I use?
Dosage depends on the masterbatch grade, base resin, original colour and desired finish. Follow Bajaj’s grade-specific recommendation and confirm through trials.
Can it improve recycled PP or PE?
It can help mask yellow undertones and improve perceived brightness in suitable recycled PP/PE. It does not remove contamination or restore degraded mechanical properties.
Does it replace white masterbatch or UV stabiliser?
No. Optical brightener modifies perceived brightness through fluorescence. TiO₂ white masterbatch provides opacity, while a UV stabiliser addresses resistance to UV-related degradation.
Can I combine it with other masterbatches?
Suitable combinations can be evaluated with white, colour and additive masterbatches. Check the complete formulation, as pigments and UV absorbers can affect the optical result.
What information is needed for a recommendation?
Share the application, PP/PE resin grade, recycled content, current colour, processing conditions and target appearance. A reference sample can help define the trial objective.
Let’s brighten your next product
Find the right
Bajaj Plast OB grade.
Tell us what you make, which PP or PE resin you use, and the finish you want to achieve.

We support recycling — helping suitable recycled PP/PE look brighter.